Steering Gear Seal 58-79 sector shaft

Click image to enlarge. This is a scan from the 1959 parts book, with the arrow pointing to 19-19-26...that is the seal that the "kit" replaces. It provides you with 3, you choose the 1 you need depending on the manufacture date of your vehicle.

Connector, A/Cleaner to Exhaust Manifold Heat Tube NOS

This is the expandable tube from the air cleaner to the exhaust manifold cover to aid in cold start up. In the parts book they call it connector, a/cleaner to exhaust manifold heat tube. I believe each (1) part need to be cut to fit, and there is actually enough for 2 uses or cars.

The part # I have is 3577808 which started in use in 71, but the "fits all models" part # of 3462462 (1970) superseded to this as early as July 9 1973 (the earliest supersession book I personally have showing the change up) so it is a correct replacement part for your 70 up Mopar, whatever it is...Cuda GTX Dart Charger Truck 300 etc. As you can see, it is the correct black with tan inside, NOT the pep boys silver crap. Roughly 2 feet long, compressed.

I have not seen any of these for sale for years.

NOS Magnum 500 Center Cap Set 3580466 ++

Magnum wheel centers (4) 3580466 + (4) retainers 2823845 + (8) screws 6029190 (not shown) . I see repops available, but I think new Mopar parts are the best. I have had these for probably 15 years or so, but plan on selling the wheels and...here they are. I see a US dealership on ebay selling these @ 66 bucks each so I think @ $250.00 shipped anywhere in the world it is a good price, less than theirs before shipping ;-) Pretty sure these were used 67-74 or so, click image to enlarge.
The picture looks like two sets of two different ones, but it is a trick of the light...the faces all match.

*SOLD* On a car in B.C. Thanks!!

Manifold Heat Control Installation Instructions

Click to enlarge, factory instruction sheet from the package.

1968 C Body Postcards Dealer Promo

Cool old dealer promo cards from my collection, click the images for full sized view. Made by Traveltime, my Uncle gave me these, are they dealer stuff? Does anyone know? Fury III, Sport Fury & New Yorker.

NOS Mopar Door Handle Pair BFCMR body 75-89 (71-4B SS)

NOS pair of 3882621 door handles originally put into production for 1975, but the 71-4 B body part # superseded to this as well. If you want to use them for that, be aware that it has a slightly different look (lip at the bottom) and you will have to fudge the links somewhat. Click image to enlarge.

100% correct for:

1975 Cordoba/Roadrunner/Fury/Coronet/Charger
1976 Aspen/Coronet/Charger/Fury/Volare
1977 Cordoba/LeBaron/Town & Country/Aspen/Charger/Diplomat/Monaco/Fury/Volare
1978 Cordoba/LeBaron/Town & Country/Aspen/Charger/Diplomat/Magnum/Monaco/Fury/Volare
1979 Cordoba (300)/LeBaron/New Yorker/Newport/Town & Country/Aspen/Diplomat/Magnum/St.Regis/Volare
1980 LeBaron/New Yorker/Newport/Town & Country/Aspen/Diplomat/St.Regis/Gran Fury/Volare
1981 LeBaron/New Yorker/Newport/Town & Country/Diplomat/St.Regis/Gran Fury
1982 New Yorker/Diplomat/Gran Fury
1983 Executive Sedan/Fifth Avenue/Imperial/Diplomat/Gran Fury
1984 Executive Sedan/Fifth Avenue/Diplomat/Gran Fury
1985-86-87-88-89 Fifth Avenue/Diplomat/Gran Fury

Original Mopar parts, not repop crap. $125.00 (PR)

Sold out!

NOS 2258404 4 Speed Back Up Switch 1963-1972

This is THE one, two prong 2258404. Was in the books as early as 63, up to 1970 (yes..Hemicuda) then I believe the 71-72 # superseded to this. Basically if you have a 4 speed Mopar musclecar, this is the switch you need/want/have been looking for. It is not the incorrect replacement part with the wrong look, this is the right part.

Sold! gone to California, thanks!!

NOS 2534814 and 2074089 Battery Hold Down J Bolts ABCE

NOS pair,1 2534814 inner, one 2074089 outer. Fits many applications ABCE body 67-71, check your app. $20.00 shipped anywhere in the world.

NOS Upper Throttle Cable Lock 2402210

NOS 2402210 Mopar throttle cable retainer, used on all engines from the 6 to the Hemi.It fit all models of Mopar, for sure every car/truck in the 70's ABECFM & trucks, I have seen it on the early 80's vehicles like Mirada, truck, Imperial Cordoba etc. and have seen the part # back in the parts books AT LEAST as far back as 1964, probably earlier. Basically, if you are restoring a Mopar, you need it, and it IS a discontinued part, not something you can go get at your local dealer. It is clip 14-25-5 in the illustration. SOLD OUT

NOS 2465483 Throttle Cable retainer all models

NOS 2465483 Mopar throttle cable plug. Being a push in -spread out type part, these seem to either break or get lost during restoration. It goes at the gas pedal, where the knob end of the throttle cable goes through a hole, then drops into a slot...this fills the hole after cable installation to keep it from popping out. A very important, yet tiny part.

It fit all models of Mopar, for sure every car/truck in the 70's ABECFM & trucks, I have seen it on the early 80's vehicles like Mirada, truck, Imperial Cordoba etc. and have seen the part # back in the parts books AT LEAST as far back as 1964, probably earlier. Basically, if you are restoring a Mopar, you need it, and it IS a discontinued part, not something you can go get at your local dealer. In the illustration, it is Plug 14-11-31. $15.00 shipped anywhere in the world.

NOS Power Steering Pressure Hose 3420194 B E C Bodies 1970 71 72

NOS Mopar pressure hose, this is the one stamped 2891214 on the one end...part # 3420194. Correct for your 340 'Cuda etc. (AAR-T/A) Listed in the 70-71 parts book as with 3/8 threaded hole pump shaft with 318 and 340 Barracuda, Challenger, Satellite (Roadrunner,GTX), Charger, Fury, Monaco. (B,J,R,W,P,D). 1972 book lists it the same, but includes the 360. SOLD OUT

Torqueflite Transmission "Handy Reference Guide"

Very cool stuff. I have many others in this series coming. Click image for full size view.

1968 1969 383 4 Barrel Intake

2806301 Casting # on this bead blasted intake (soft surface rust) for A,B or C body 383. 68 or 69, and I cannot read the date code (scrub brush & better light probably)... it looks like 68? $90.00 + shipping, email me so I can calculate that for you.

1970 1971 cars with concealed wipers jamming TSB

TSB # 1999 dated 3-5-71. Click image for large view.

NOS 4058429 10 Inch Flexplate 904/727

I see this listed to fit 67-74 273-318-360-383-400 and 73-74 440 with the 10 inch converter 904 or 727...7 inches from (converter mounting) hole to hole. Check your app, or I could check for you if you like. Was available @ Chrysler in 2002 (when I bought it) for $50.00 SOLD OUT

NOS 2204768 727 Flexplate

This is for the 11 inch + torque converter. It measures about 8 inches (converter mounting) hole to hole. Nearest I can figure from looking @ the parts books is this was used from 64-76, 273-318-360-383-400-440. Oddly I did not see it listed for 340? maybe I missed it, check your app. Last I checked you could get these from Chrysler in 2003 (so NORS) @ $88.00 each, but not sure if you can now, or how much they have gone up. SOLD OUT

1974 HP 440 Air Cleaner

This one is very hard to find. It specifically fits 1974 only 440 in Dodge and Plymouth Cop Cars, + the Charger Rallye 440 and The Roadrunner GTX. See how the arms are closer than the standard one. It has the 400 decal, only because I have been swapping around lids (the lids are physically the same) to put air cleaners together. No rust on this at all.

There is a bunch of pictures here to show the inside, the side, the valve, and one of it on top of a '74 400 aircleaner to show how much closer the arms are on this 440 one. There is also a picture of the new AC118 Mopar Air Filter that is included.

In the pic with the decal, you may see a 1972 date, but that is actually a copyright date for the decal itself, that was used until 83-84 or so. Also the OSAC valve # (3755727) corresponds to be correct for 74 440 (also others...). Click each image to enlarge...

*SOLD*

1972 440 4 Barrel Intake

Casting # 3614014 1972 B or C body 440 intake manifold with early date code of 10/8/71. Bead blasted and repainted with high heat paint. $90.00 + shipping, email me your address so I can calculate that for you.

1971 440 4 Barrel Intake # 1

Casting # 3512501 on this 1971 B,C or E body 440 4 barrel intake manifold. Bead blasted and repainted with high heat paint. Early date code of 9/15/70, $100.00 + shipping, email me with your address so I can calculate that for you.

1971 440 4 Barrel Intake # 2

Casting # 3512501 on this 1971 B,C or E body 440 4 barrel intake manifold. Bead blasted and repainted with high heat paint. 100.00 + shipping, email me your address so I can calculate that for you. I did not see a date code (the casting # is right for 71 anyway)....it may be on the bottom.